'MDRIVE DEMO PROGRAM
'Last modified 08/25/2016
'Sample test program for demonstration purposes only
'Not tested or verified for safety or any function
'***** Electronic Gearing *****
PR "Electonic Gearing"
Rc=50 'set run current to 50%
S7=33,0 'Sets clock type to step input
S8=33,0 'Sets clock type to direction input
Fm=3 'set filter motion to 1.67 Mhz cutoff freq.
Ms=16 'Set microstep resolution to 16
Cm=1 'Clock mode enable
Cr=1.000 'Set clock mode ratio to 1:1
'keep this line
This program demonstrates the use of high speed inputs to allow for electronic gearing operations.
- Compatible MDrive product with Expanded I/O product
- DC power supply
- Clock/direction signal source
When it comes to your form, fit and function requirements, don’t settle. Get precisely what you need working with us. We know motion.
Contact us with any questions about how we can help you with your motion application or for assistance with your SEM products.